The Bp MOD AMPBB(Internal Battery Boro Mod) + DACBB (AMP: Amplifier DAC:Digital-to-analog Converter Boro Mod) Kit is design for the audiophile of Boro Kit Lovers.Most appearance design points , like the windows , the LEDS and light tubes , and the visible electronic components , were inspired y vacuum tube power amplifiers, power by 2000mAh battery.and capatible with the most of boro tank,and this small size is good for you on the go.
Brand: BP MODS
Colors: Gunmetal and Silver
Battery:2000mAh
Fiber Front & Back panels
Insulated Carbon Fiber for Gunmetal
Glass fiber for Silver
Aluminum Alloy Body
60W max power
Independent Real Boost Chip Set
Each set contain:
1pc DACBB Fast Flush Tip Kit
1pc O-ring 8*1.5mm
2pcs O-ring 9*1mm
4pcs O-ring 10*1mm
4pcs Light Tubes
5pcs Anti-Condensate cottons
2pcs Engreved Flush Nut Spanners
4pcs T5 Screws KM1.6mm* 5.6mm
1pc Type-C Cable
1pc Spare Parts
Tips:Anti-Condensate Compressed cottons:
1. Take a piece of Anti-condensate Compressed Cotton and put it inside the round pit around the positive contact of the mod before installing your boro .
2. These Cottons are washable and reusable . To clean the Cottons , put them under running water
3. DO NOT rub the Cottons or wash them by ultrasonic bath machines, These acts may damage the fiber structures of the Cottons , and reduse their service time
4. To dry the washed Cottons , sandwich them between tissues , press until they get dry
About Engreved Flush Nut Spanners:
One Flush Nut Spanner is attached on the Front Panel of AMPBB Mod by magnets . The other two Spanners are inside the package as accessories . Put them on for decorations , or remove them as Spanners for the Flush Nut.
After several times of using , abrasions or scratches may appear or the surface of these Spanners , which is a normal phenomenon
Most fast flush drip tips for boro mods cause slight resistance errors,Because it is hard to exert sufficient torsion and frictions to screw the
Flush Nut tight enough just by bare hands , unless there are specialized stress structures on those tips.
To obtain an accurate resistance , we usually need an appropriate tool, e.g, a coin , a bottle opener , or the bottom edge of a pair of tweezers , to screw the Flush Nut tight enough before vaping.
Unfortunately , it is not an easy thing to find an appropriate tool any time any where , especially when you are carrying your boro mod outdoors . This is the reason why we made these Flush Nut Spanners for AMPBB Mod , and this DACBB Fast Flush Tip Kit for all boro users BPMODS , all for experience.
Try some DIY works on those Light Tubes . Try to use maybean art knife, a mark pen , or maybe some crystal epoxies.. tocreate more cool ande unique visual light effects for your modit is all up to your imaginations,Have fun.